产品展示
OCP互锁快断阀
机柜维护需要将单台服务器节点从运行中的液冷回路中带液拔出,OCP 互锁快断阀为此设计:公母两端各带弹簧预紧的自密封阀芯,对插时阀芯相互顶开、流道贯通;分离瞬间双侧阀芯同步复位关闭,实现“带压插拔、无滴漏断流”,系统其余部分无需停机泄液。红 / 蓝 O 型圈与差异化结构尺寸双重互锁,供回水路物理防错插;接头符合 OCP 冷板快接规范口径与断流性能要求,是冷板式液冷机柜的标准配套件。
所属分类:
液冷阀门
咨询热线:
OCP互锁快断阀
OCP互锁快断阀 OCP Interlock Quick-Shutoff Valve
莱科 OCP 互锁快断阀,服务器节点热插拔配套的快速断流接头:插合自动接通、拔出双侧同步断流,阀内自密封无滴漏;红 / 蓝 O 型圈标识供、回水路防止错插,符合 OCP 液冷接头规范。 The LIKE OCP interlock quick-shutoff valve is a dry-break coupling pair for hot-swappable server nodes: flow opens automatically on insertion and both sides seal instantly on removal with zero spill. Red / blue O-rings code supply and return lines against mis-connection, in line with OCP liquid-cooling practices.

| 产品系列 Series | OCP互锁快断阀 OCP Interlock Quick-Shutoff Valve |
| 型式 Type | 双侧自密封快断联轴器 Dry-break coupling |
| 公称通径 Bore | 1/4″ ~ 3/4″(DN8 ~ DN20) |
| 阀体材质 Body | 不锈钢 / 镀镍铜合金 Stainless / plated alloy |
| 密封 Seals | FKM / EPDM |
| 典型应用 Typical Use | 服务器节点热插拔 / 冷板快接 |
机柜维护需要将单台服务器节点从运行中的液冷回路中带液拔出,OCP 互锁快断阀为此设计:公母两端各带弹簧预紧的自密封阀芯,对插时阀芯相互顶开、流道贯通;分离瞬间双侧阀芯同步复位关闭,实现“带压插拔、无滴漏断流”,系统其余部分无需停机泄液。红 / 蓝 O 型圈与差异化结构尺寸双重互锁,供回水路物理防错插;接头符合 OCP 冷板快接规范口径与断流性能要求,是冷板式液冷机柜的标准配套件。
Maintenance demands pulling a live server node from a pressurized loop. The LIKE coupling pair gives each side a spring-loaded self-sealing poppet: on insertion the poppets open each other for full flow; on removal both snap shut simultaneously — hot-swap, dry-break disconnection with the rest of the loop untouched. Red / blue O-rings plus different-sized shrouds physically prevent supply / return mix-ups, meeting OCP cold-plate quick-disconnect practices.
| 参数 Parameter | 规格 Specification | |
|---|---|---|
| 通径范围 Size Range | 1/4″ / 3/8″ / 1/2″ / 3/4″ | 按机柜节点流量选型 Sized per node flow |
| 工作压力 Working Pressure | 0 ~ 0.6 MPa | 与机柜快接回路匹配 Matches rack QDC loop |
| 工作温度 Temperature Range | 0 ℃ ~ +60 ℃ | 服务器进液温度范围 Server inlet range |
| 适用介质 Media | 去离子水 / 乙二醇水溶液 | — |
| 断流方式 Shutoff Mode | 对插自动开启,分离即闭 | 双侧无滴漏 Dry-break on both sides |
| 防错插 Mis-insertion Proof | 红 / 蓝 O 圈 + 互锁结构尺寸 | 供回水不可互换 Supply / return interlocked |
| 状态 State | 动作 Action | |
|---|---|---|
| 插合 Connected | 双阀芯相互顶开,流道贯通 | 密封面同步锁闭,外泄为零 Zero external leakage |
| 拔出 Disconnected | 阀芯弹簧复位自动断流 | 母端 / 公端各自密封,无滴漏 Each side self-seals, drip-free |
| 防错插 Mis-insertion Proof | 红 / 蓝 O 圈与结构尺寸互锁 | 供回水路物理防呆 Physical supply / return coding |
| 部件 Part | 材质 Material | |
|---|---|---|
| 接头体 Coupling Body | 不锈钢 / 镀镍铜合金 | 耐蚀且抗机柜频繁插拔 Corrosion-resistant, insert-cycle rated |
| 阀芯 Poppet | 不锈钢 + FKM 密封 | 弹簧预紧自密封 Spring-loaded self-sealing |
| 弹簧 Spring | 316 不锈钢 | 恒力复位,启闭数万次 Stable force over thousands of cycles |
| O 型圈 O-ring | 红 / 蓝 FKM | 颜色即供回水标识 Color-coded supply / return |
| 端接 End Fitting | 宝塔 / 外螺纹 / 软管端 | 与机柜 UQD 管路对接 Matches rack plumbing |
| 1/4″ / 3/8″ | 宝塔软管端 Hose barb | φ6 / φ10 软管 |
| 1/2″ / 3/4″ | 外螺纹端 Male thread | G / NPT 接管或 UQD 转接 |
服务器节点热插拔 Server Hot Swap 不停机带液更换故障节点,运维效率倍增。 Swap failed nodes without loop shutdown. | 冷板快接 Cold-plate Quick Connect 冷板进出液口的快速对接与防错插。 Fast coded connection at cold-plate ports. |
机柜维护换件 Rack Maintenance 母端固定于机柜,公端随机柜管路预装。 Fixed half in rack, mating half pre-plumbed. | 测试台快接 Test Bench Hookup 测试工位快速插接,红蓝对位防误接。 Coded hookups for test benches. |
1. 确认红 / 蓝 O 圈与供、回水路一一对应,禁止依靠转接强行对插;
2. 插合时对中轴向推入,到位后轻拉确认自锁;
3. 拔出前无需系统泄压,轴向按压释放机构后拔出,双侧自动断流;
4. 定期检查 O 圈有无老化、划伤,异常立即整套更换;
5. 长期插拔后可在密封面涂抹冷却液润滑,禁止使用油脂类润滑剂。
1. Match red / blue O-rings to supply / return; never force-fit with adapters. 2. Insert axially until it clicks; tug to confirm lock. 3. No loop depressurization needed — press the release axially and both sides shut automatically. 4. Inspect O-rings for aging or cuts; replace the set if abnormal. 5. For long service, wet seals with coolant only — never grease.
订货时请注明:通径规格(1/4″ ~ 3/4″)· 红 / 蓝端配置数量· 端接形式(宝塔 / 外螺纹 / 软管)· 密封材料(FKM / EPDM)· 是否需按机柜 UQD 规格定制。可按项目需求提供批量配套。
When ordering, please specify: size (1/4″~3/4″), red / blue pair configuration, end type (barb / male thread / hose), seal material (FKM / EPDM) and any rack UQD customization. Bulk supply available for projects.
上一页
液冷自动排气阀
下一页




津公网安备 12011602000999号