产品展示
电动/气动液冷蝶阀
电动 / 气动液冷蝶阀在大口径对夹蝶阀基础上配套电动或气动执行器,把主回路阀门的操作从「就地手动」升级为「远程自控」。电动执行器接入 DCIM / BMS,支持开关型与 4-20mA 调节型,带阀位反馈,适合以电缆为主的机房自控网络;气动执行器动作快、失气安全位可选,适合与消防、泄漏联锁的安全切断场合。不锈钢蝶板双向密封、低扭矩,执行器按 ISO 5211 直装,整体到货免现场调试。用于 CDU 总管、楼层主环路等大口径点位的集中启停与安全联锁,是液冷主回路自动化改造的标配阀门。
所属分类:
液冷阀门
咨询热线:
电动/气动液冷蝶阀
电动/气动液冷蝶阀 Motorized / Pneumatic Liquid Cooling Butterfly Valve
莱科电动 / 气动液冷蝶阀,大口径蝶阀配电动或气动执行器,实现主回路的远程开关与联锁切断,是液冷主环路集中自动化控制的核心执行阀门。 The LIKE motorized / pneumatic liquid cooling butterfly valve pairs a large-bore body with electric or pneumatic actuation for remote on-off and interlock isolation — the core actuated valve for centralized main-loop automation.

| 产品系列 Series | 电动 / 气动液冷蝶阀 Actuated Butterfly Valve |
| 公称通径 Bore | DN50 ~ DN300(2″ ~ 12″) |
| 执行器 Actuator | 电动(开关 / 调节型)/ 气动(双作用 / 弹簧复位) |
| 控制信号 Signal | 触点开关量 / 4-20mA |
| 阀体材质 Body | 不锈钢 / 球墨铸铁镀镍可选 |
| 典型应用 Typical Use | 主回路远程启闭 / 联锁切断 |
电动 / 气动液冷蝶阀在大口径对夹蝶阀基础上配套电动或气动执行器,把主回路阀门的操作从「就地手动」升级为「远程自控」。电动执行器接入 DCIM / BMS,支持开关型与 4-20mA 调节型,带阀位反馈,适合以电缆为主的机房自控网络;气动执行器动作快、失气安全位可选,适合与消防、泄漏联锁的安全切断场合。不锈钢蝶板双向密封、低扭矩,执行器按 ISO 5211 直装,整体到货免现场调试。用于 CDU 总管、楼层主环路等大口径点位的集中启停与安全联锁,是液冷主回路自动化改造的标配阀门。
The LIKE actuated liquid cooling butterfly valve upgrades large-bore wafer valves from local manual operation to remote automatic control. The electric actuator integrates with DCIM / BMS as on-off or 4-20mA modulating duty with position feedback for cabling-based plant networks; the pneumatic version acts in seconds with optional fail-safe positions for fire- and leak-linked safety isolation. A stainless disc gives bidirectional low-torque sealing, and the ISO 5211 direct-mount actuator arrives pre-assembled and commissioning-ready. It is the standard actuated valve for centralized switching and safety interlocks on CDU headers and floor main loops.
| 参数 Parameter | 规格 Specification | 说明 Remarks |
|---|---|---|
| 通径范围 Size Range | DN50 / DN65 / DN80 / DN100 / DN125 / DN150 / DN200 / DN250 / DN300(2″ ~ 12″) | 更大口径可定制 Larger sizes on request |
| 执行器 Actuator | 电动(开关 / 调节型)或气动(双作用 / 单作用) | 按自控与安全逻辑选型 Selected per control and safety logic |
| 控制信号 Control Signal | 开关量触点;调节型 4-20mA / 0-10V | 带阀位反馈 Position feedback included |
| 气动参数 Air Supply | 0.4 ~ 0.7 MPa,动作 3 ~ 15 秒 | 失气安全位可选 Fail-safe option |
| 工作压力 Working Pressure | 0 ~ 1.6 MPa | 更高压力工况请联系选型 For higher pressure, contact us |
| 工作温度 Temperature Range | -10 ℃ ~ +120 ℃ | 取决于阀座材料 Depends on seat material |
| 阀座材料 Seat | EPDM / FKM / PTFE | 按介质与温度选择 Selected per media and temperature |
| 适用介质 Media | 去离子水 / 乙二醇水溶液 / 合成冷却液 | Deionized water, glycol solution, coolant |
| 驱动 Drive | 优势 Strength | 典型用途 Typical Duty |
|---|---|---|
| 电动 Electric | 只需电源,布线方便,支持调节与反馈 | 以电缆自控为主的机房机房主回路 Cable-based plant automation |
| 气动 Pneumatic | 动作快,失气安全位,无电火花 | 联锁保护与紧急切断 Interlock and emergency isolation |
| 双配置 Dual-sourcing | 同一阀体可换装两种执行器 | 分阶段建设项目的灵活选型 Phased projects, flexible sourcing |
| 部件 Part | 材质 Material | 特性 Feature |
|---|---|---|
| 阀体 Body | 不锈钢 / 球墨铸铁环氧涂层 | 按介质与预算选择 Selected per duty and budget |
| 蝶板 Disc | CF8 / CF8M 不锈钢 | 密封缘抛光,双向密封 Polished edge, bidirectional seal |
| 阀座 Seat | EPDM / FKM / PTFE | 软密封零泄漏等级 Soft sealing, tight shut-off |
| 阀杆 Stem | 不锈钢防吹出结构 | 承压安全,传动可靠 Pressure-safe stem drive |
| 电动执行器 Electric Actuator | 开关型 / 调节型,IP65 | 带手轮应急与阀位反馈 Handwheel override and feedback |
| 气动执行器 Pneumatic Actuator | 双活塞齿条式铝合金缸体 | 扭矩大动作快,弹簧复位可选 Rack-and-pinion, spring return optional |
| 规格 Size | 驱动配置 Actuation | 连接方式 End Connection | 适配管路 Matching Pipe |
|---|---|---|---|
| DN50 / 2″ ~ DN150 / 6″ | 电动 / 气动 | 对夹式夹持安装 Wafer | 管道法兰 + 双头螺栓 |
| DN200 / 8″ ~ DN300 / 12″ | 电动 / 气动 | 对夹式夹持安装 Wafer | 管道法兰 + 双头螺栓 |
主环路远程启停 Main-loop Remote Switching 楼层主环路分区启停集中管理,缩短切换时间。Centralized zone switching on floor mains with fast changeover. | CDU 总管自控 CDU Header Automation CDU 总管进出口的远程切断与投运。Remote cut-in / cut-off on CDU header connections. |
联锁保护切断 Interlock Isolation 与消防、泄漏系统联动的主回路紧急切断。Emergency main-loop isolation linked to fire / leak systems. | 储能与功率液冷 Energy Storage & Power Electronics 储能舱与功率模块主冷却回路的自控阀门。Actuated valves on battery and power-module main cooling loops. |
1. 安装前核对执行器电源 / 气源与控制信号类型,蝶板全开位穿入管路对中;
2. 法兰对中后对称紧固,确认蝶板旋转无干涉;
3. 通电 / 通气空载试动作,校验行程限位与阀位反馈;
4. 与联锁系统联调时模拟失电 / 失气,确认到达安全位;
5. 定期检查执行器密封、接线与气路排水,保持动作灵活。
1. Verify power / air supply and signal type; insert the valve with the disc open and align pipes. 2. Align flanges, torque evenly and confirm free disc rotation. 3. Dry-cycle under power / air and verify stroke limits and position feedback. 4. Simulate power / air failure during interlock commissioning to confirm the safe position. 5. Periodically inspect actuator seals, wiring and air-line drainage.
订货时请注明:通径规格(DN50 ~ DN300)· 执行器类型(电动开关 / 电动调节 / 气动双作用 / 气动弹簧复位 FC / FO)· 控制信号· 阀体与蝶板材质· 阀座材料· 工作压力与介质。可批量配套与预接线交付。
When ordering, please specify: size (DN50~DN300), actuator type (electric on-off / modulating, pneumatic double acting / spring return FC / FO), control signal, body and disc material, seat material, working pressure and media. Bulk supply and pre-wired delivery available.
上一页
卫生级快装液冷蝶阀
下一页


津公网安备 12011602000999号